Mobile Hotspot Wi-Fi Not Found

In this tutorial, you will learn how to:

 

• Re-broadcast the Wi-Fi network
• View/unblock blocked devices
• View/edit/delete schedule rules
• Check network status

 

Re-broadcast the Wi-Fi network

1. From your device's web browser, go to http://hotspot.webui. Enter your password, then select Login.

 

Note: If you haven’t logged into the Web admin page before, the default password will be ‘admin’. You will be prompted to change the admin password. Ensure that your device is connected to your Turbo Hotspot 3's Wi-Fi network. For more information, please see the Connect Devices to Wi-Fi or Connect PC or Mac to Wi-Fi tutorials.

 

2. Select the Wi-Fi drop-down menu on the left side of the screen, then select Wi-Fi Basic Settings.

 

3. Select the Enable switch to place it in the Off position, then click the Enable switch again to place it in the On position.

 

---

View/unblock blocked devices

1. From home screen of the WebUI website, select the Wi-Fi drop-down menu on the left side of the screen then select Connected Devices.

 

2. Select the Remove icon beside the desired blocked device.

 

---

View/edit/delete schedule rules

1. From the home screen of the manager website, select the Security drop-down menu on the left side of the screen then select Parent Control.

 

2. From here you can view existing schedule rules. To add a new schedule rule, select Add New Rule.

 

3. Enter the desired schedule rule information, then select Save.

 

4. To delete a schedule rule, select the Delete icon beside the desired schedule rule then select OK.

 

Note: To delete all schedule rules at once, click Delete All then click OK.

 

 

---

Check network status

The network connection status will be displayed with a Signal bars icon on the home screen of the AT&T Turbo Hotspot 3.