Set up port forwarding for NVG510
You use port forwarding to access devices on your home network from outside your home. Learn more about port forwarding and how to set it up for your gateway.
You’re viewing instructions for
Internet equipment
Motorola
NVG510
KM1010276-slctrgrp_motonvg510
Learn about port forwarding
Use port forwarding to route incoming and outgoing data on your home network from a remote location.
Each device connected to the internet has an IP address divided into various ports that send and receive data. Your Wi-Fi® gateway routes this data to where it needs to go. When you set up port forwarding, you set up rules to tell the gateway to route data sent or received on a port to a specific IP address on your home network.
Most people won’t use port forwarding, but you might if you:
Each device connected to the internet has an IP address divided into various ports that send and receive data. Your Wi-Fi® gateway routes this data to where it needs to go. When you set up port forwarding, you set up rules to tell the gateway to route data sent or received on a port to a specific IP address on your home network.
Most people won’t use port forwarding, but you might if you:
- Use SlingSM or another streaming media device
- Host a web or gaming server
- Access a home surveillance camera or device remotely
- Use Remote Access or VPN to access a computer in the home
- Host photo-sharing hard drives
Set up port forwarding
To open a port for user-defined applications:
- Go to your gateway settings.
- Select Firewall and then NAT/Gaming.
- If you get a warning message, restart your Wi-Fi gateway. Then, continue with these steps.
- Select Continue.
- From Service, select the application for port forwarding.Â
- If your application isn't in the list, or you are setting up port forwarding for a device:
- Select Custom Services.
- In Service Name, enter the name for the application or device.
- Enter the port(s) you wish to open for Global Port Range. It's recommended to create a separate service entry for each port as opposed to using a port range. In this case the port number should be the same in the Global Port Range fields.
- Select the appropriate Protocol from the drop-down for the application or device you are adding.
- Select Add. Repeat as needed for additional applications and devices.
- When all applications have been added, select Return to NAT/Gaming. Your new applications will display in the Applications list.
- From Needed by Device, select the device name or IP address of the device to open the port.
Â
- Select Add.
- When your selections display in Hosted Applications, select Save.
Last updated: March 6, 2024