Connect to AT&T Network
Which device do you want help with?

Connect to AT&T Network

This article describes how to connect to the AT&T Network.

INSTRUCTIONS & INFO
  1. Slide the ON/OFF switch to the ON position to turn the device on. The Power light on the front of the device will turn green.
    Note: The account must be active and provisioned with an appropriate voice/data plan and the device must be located within AT&T network coverage.
    device 5174/9006685_01.jpg
  2. The Signal Strength LED will show the current connection status.
    Note: The LED will display green if the AT&T Wireless Internet is receiving a LTE signal, blue if it is receiving a 3G/4G/HSPA+ signal, red if it is receiving no wireless signal or a SIM error.
    device 5174/9006685_02.jpg

Did you get the help you needed?