Which device do you want help with?

Phone assembly

Install and remove the SIM and battery.


INSTRUCTIONS & INFO
  1. If a SIM is not in the device the “No SIM card” message will display in the homescreen when the device is turned on. The device can only function for emergency calls to 911 in this state.
    device 5056/9006107_01.jpg
  2. The SIM Card tray is located under the back plate of the device. To take the plate off, lift the notch at the bottom of the phone. 
    device 5056/9006107_02.jpg
  3. Remove the battery by lifting at the bottom of the battery.
    device 5056/9006107_03.jpg
  4. The SIM card slot is on the bottom right of the phone. Insert the miniSIM card by making sure the gold contacts are facing down and the cut-off corner is at the top left.
    device 5056/9006107_04.jpg
  5. Insert the Battery with the gold contacts touching at the top right. 
    device 5056/9006107_05.jpg
  6. Replace the back cover, press the edges so no gaps are present.
    device 5056/9006107_06.jpg

Did you get the help you needed?