Connect to AT&T Microcell
Which device do you want help with?

Connect to AT&T Microcell

Learn how to connect your mobile device to AT&T MicroCell.

INSTRUCTIONS & INFO
  1. To use your new AT&T 3G or 4G phone with an AT&T Microcell, it must be within signal range and added to the approved user list.
    Note: 2G and non-AT&T devices are not compatible with AT&T Microcell.
    device 2842/1691019.jpg
  2. To add a device to your approved user list, from the home screen of the device you set up as the AT&T Microcell's primary number, tap Messages.
    Note: You can also add an approved user by logging in at www.att.com/microcell using your myAT&T account information.
    device 2842/1691021.jpg
  3. Tap the Compose icon to send a message to a new recipient.
    device 2842/1691022.jpg
  4. Enter the short code 6235 (MCEL) as the recipient of the text message.
    device 2842/1691023.jpg
  5. In the message field, enter "Add" followed by the number to add to the Approved User List.
    device 2842/1691024.jpg
  6. Tap Send.
    device 2842/1691025.jpg
  7. When successfully connected, the cell phone will show "AT&T MicroCell" or "AT&T M-Cell."
    Note: Depending on the signal strength of the AT&T cell tower, the time for your cell phone to switch to the MicroCell can vary. It may take seconds or up to five minutes.
    device 2842/1691026.jpg
  8. If you do not see "AT&T MicroCell" or "AT&T M-Cell", turn your mobile device (not MicroCell) off, wait 10 seconds and then turn it back on.
    Note: Depending on the signal strength of the AT&T cell tower, the time for your cell phone to switch to the MicroCell can vary. It may take seconds or up to five minutes. To learn more about the AT&T Microcell go to www.att.com/devicehowto and select "MicroCell".
    device 2842/1691027.jpg

Did you get the help you needed?